Loading

Yaskawa Motoman Case Study

ACS-099.jpgAgricultural Equipment, Arc Welding and Handling

Challenges

  • Provide flexible system to weld and handle 12 different hay baler roll assemblies. These consist of tubes with trunnions on each end that are tack-welded in place, plug-welded and then final-welded.
  • Tubes are 1,170-1,556 mm L and have ODs ranging from approximately 89-168 mm. Final welded assemblies are 1,318-1,959 mm L.
  • System must be designed to hold enough parts to support approximately one hour of unattended production.
  • Improve weld quality and reduce rework. Achieve run-out tolerance within 1.5 mm for tubes and 0.4 mm for trunnions.
  • Achieve cycle time of approximately 5-6 minutes per part.

Solution

A Yaskawa Motoman custom welding and handling solution, including:

  • Two Motoman® robots with base risers. The arc welding robot features a 50-kg payload; the material handling robot features a 200-kg payload.
  • Miller 450-amp AutoAxcess® weld package, including interface, four-roll wire feeders and feed rolls, interconnecting cables and weld dress-out package.
  • Motoman Tough Gun® package with 500-Amp air-cooled torch.
  • Motoman ComArc (80-V) touch-sense package with seam-tracking.
  • Reamer/sprayer nozzle cleaning station.
  • Custom end-of-arm tool pneumatic multi-function mechanical gripper for robot.
  • Motoman rotary positioner (for trunnion infeed) with 300 kg capacity per side and 4-second index. Includes two fixtures (one per side), each with 24-trunnion capacity.
  • Tube infeed/outfeed devices gravity-fed infeed with singulator, and gravity outfeed chute, including three-level racks with rack-full sensors.
  • Laser sensor station. Laser sensor is used to determine the location of the welded trunnion shaft relative to disc.
  • Motoman headstock positioner with 3,000 kg rated headstock load; 6.7 rpm headstock speed; and 4.95-second 180-degree sweep.
  • Allen-Bradley PLC package with HMI interface.
  • Cell guarding package that complies with ANSI/RIA-15.06-1999 safety standard. Includes perimeter safety fence with two access gates; arc flash curtains; safety laser scanner at trunnion infeed station; and 4-color status beacon with audible alarm.

Fixtures/Tooling

Yaskawa Motoman provided a custom pneumatic multi-function mechanical gripper for the material handling robot that handles two trunnions and one tube/roll assembly of the required sizes. Gripper includes open/closed sensors, and laser sensor that searches for slots or holes in tubes and verifies length/diameter. Customer-provided pneumatically clamped mechanical slide welding fixture is mounted on heavy-duty positioner.

Project Results

  • System exceeds requirements for quality improvement. Run-out tolerances are consistently held to 0.2 mm on trunnions and 0.75 mm on tubes, which is twice as good as the goal of 0.4 mm on trunnions and 1.5 mm on tubes.
  • Robotic solution achieves goal of significantly reducing rework and related direct labor costs.
  • System meets requirement for ability to support approximately one hour of unattended production.
  • System achieves adequate cycle time, which is expected to improve even more as customer implements additional tooling and part changes.

Schedule a Consultation

See if robotics is a good fit for your business. Click below to contact an automation specialist with experience in your industry.

Contact a Yaskawa Motoman robotics specialist