MotoWeld S-Series

MotoWeld S-Series general purpose CV welders include a “software tap” that provides three different levels of inductance based on the current. This provides low spatter and superior arc stability through the entire current operating range. The S-Series also has an STC (short circuit control) mode. This mode improves short arc length control for higher speed welding.

The S200 is specifically designed for thinner material (1.0-2.0 mm) with a “super change circuit” for better low end stability. The S350 is suitable for general light gage fabrication (2.0-4.0 mm) galvanized steel.

The S-Series also performs well with stainless steel and coated materials.

	MotoWeld S200	MotoWeld S350
Input	3-Phase, 480V, ±10%	3-Phase, 480V, ±10%
Frequency	50/60 Hz	50/60 Hz
Input	10 kVA	18 kVA
Output, Current	50-200A	50-350A
Output, Voltage	13-24V	16-36V
Operation Rate	100%	50%
Control Method	Independent only	Unified/Independent
Dimensions (WxDxH)	371 x 725 x 676 mm (14.6 x 28.5 x 26.6 in.)	371 x 725 x 676 mm (14.6 x 28.5 x 26.6 in.)
Weight (approx.)	46 kg (101.4 lbs.)	46 kg (101.4 lbs.)