Yaskawa Motoman industrial robots and robotics automation systems

ONSITE - NX100 Maintenance with Programming Overview

To submit a request for on-site training, click here or call us at 937-847-3307.

Description Classroom lectures on maintenance procedures are reinforced with demonstrations. Commands and topics are related to real-world examples and applications. Material covered in the lectures are enhanced with actual hands-on maintenance and troubleshooting performed by students in Motoman's 8,500-sq.ft. training facility. Students perform lab exercises which reinforce topics covered in the class lectures. Class size is kept small, typically 12 or fewer, to promote an interactive, high level of hands-on learning required.
Topics Students learn to perform preventive maintenance and troubleshooting on the NX100 controller and EA/ES/HP-series robots.

Primary topics include:

  • NX100 controller hardware architecture
  • Circuit board replacement
  • I/O connections
  • Power distribution
  • Signal flow
  • Basic servo theory
  • Servopack replacement procedures
  • Speed reducer replacement
  • Motor replacement
  • Preventive maintenance schedule
  • Robot calibration procedures
  • Overview of Basic Programming
Overview The NX100 HP/ES/EA-Series Maintenance Module is a preventive maintenance/troubleshooting course for the NX100 controller and the HP/ES/EA-series industrial robots. Individuals responsible for maintenance/repair, preventive maintenance, troubleshooting, and diagnosis should attend this class. No prior robot programming experience is required, but NX100 Basic Programming is highly recommended.
Materials Students receive a copy of the NX100 -Series Maintenance Manual which details installation, maintenance, electrical diagrams, spare parts, etc. for the HP/ES/EA-series robot models. Additional handouts relate to specific topics covered in the class. Students are urged to take notes, participate in discussions, and to bring up specific programming issues.
Length This module is a 4.5-day training class. On-Site classes are demand based and should be scheduled 60-90 days in advance to ensure availability.
Prerequisite NONE
Price Pricing subject to length and travel expenses. Please submit a request for quotation by clicking the link below.
Notes Price is for up to 6 students using customer provided robot systems. Plus travel expenses. No more than 3 students per programming pendant. For a training proposal, contact the MOTOMAN Technical Training Manager at 937.847.3229 This class is highly recommended to be conducted at MTEC due to the ROBOTS AND CONTROLLERS being disassembled. Please note that the instructors to do not carry any spare parts.