The NX100 Basic Programming Module is an introductory course to the NX100 controller and to programming Motoman EA/ES/HP-series industrial robots. No prior knowledge of robot programming or of the NX100 controller is required.
Course Overview
The NX100 Basic Programming Module is an introductory course to the NX100 controller and to programming Motoman EA/ES/HP-series industrial robots. No prior knowledge of robot programming or of the NX100 controller is required.
Course Materials
Students receive a copy of the NX100 Basic Training Manual, which details commands and programming techniques for the Motoman NX100 controller. Additional handouts relate to specific topics covered in the class. Students are urged to take notes, participate in discussions, and to bring up specific programming issues.
Topics
Primary topics include:
- Robot safety
- System power up/down
- Coordinate systems
- Job functions
- Programming pendant
- Path editing
- Cut and paste functions
- Position levels
- Speed correction
- Arithmetic variables
- Fault recovery
- I/O and control instructions
- User frames
- Tool Center Point (TCP)
- Basic Software Weaving
- Basic Arc Instructions
Notes
Price is for up to 6 students using customer provided robot systems. Plus instructor's travel expenses. No more than 3 students per programming pendant. Robot cells not available? Then you may want to consider the NX100 SES (Simple Education System) as an option for Training. For a formal Training Proposal, contact the MOTOMAN Technical Training Manager at 937.847.3229 Customer must provide all welding coupons and other welding materials.